The DD740 is compatible with learning remote controls, providing seamless integration with your A/V system.

Every learning remote is capable of replicating the IR commands of the DD740's own remote control. Please refer to the instructions that accompany your learning remote for details of how to do this.

In addition, the DD740 has extra IR commands that can be programmed into more sophisticated learning remotes such as the Philips Pronto and ProntoNEO. By sequencing these commands, total control of the DD740 may be achieved. For example, turning on the DD740, selecting the input, selecting the delay preset and even setting its display brightness, all from a single button press on your learning remote.

The full set of IR commands available are:

*Only available when using a suitable programmable learning remote control

	Philips Pronto, Marantz RC5400 When using a Pronto or Marantz RC5400, all the IR commands listed above are available. Click here for the .CCF file. Click here for a text file containing all the hex codes for the commands above. For assistance, please contact
	Philips ProntoNEO, Marantz RC3200 IR codes available here shortly. Please check back soon.
	Philips ProntoPro When using a ProntoPro, all the IR commands listed above are available. Click here for the .PCF file.
	Universal Remote Control MX-700, MX-850 With the MX-700 and MX-850, all the IR commands listed are available. Save the DD740's .CCF file from this page (see below), then use the MX Editor software's Universal Browser" feature to upload the file to your remote control.
	Crestron IR codes available here shortly. Please check back soon.
	Logitech Harmony Logitech Harmony remote controls can support all the IR commands listed above. To add support for the Felston DD740, update your remote as usual from the Logitech Harmony website.
	One-For-All Suitable One For All remote controls can support all the DD740 IR commands. Use the UEI code 2130. Alternatively, if your One For All remote is upgradable over a phone line, please contact your local One For All support center and ask for your remote control to be upgraded to support the Felston DD740.

Other Learning Remote Controls
If your learning remote can upload a file from a PC, then it might also be able to make use of the .CCF file - see section below.

If you have a particular remote control that it not currently supported and you would like to integrate the DD740 with it, please

.CCF File
The .CCF file format is native to the Philips Pronto series of learning remotes. However, many other makes of learning remote controls can also use this file. Please refer to your user manual for information on your model.

The .CCF file includes all the IR commands available.

To obtain the DD740's .CCF file, click here and save the file to your computer.